Spartan 3 v2
For a limited time, 14Point7 will pay all duties on US shipments. US customers pay no duties. Spartan 3 v2 is a purebred CAN bus enabled Wideband Oxygen Controller for the Bosch LSU 4.9 and LSU Adv Wideband sensor with no excess. Spartan 3 v2 is equipped with, 1x high-performance programmable analog output, 1x standard-performance programmable analog output, CAN bus, and USB. The advanced design, highest quality components, and extensive factory calibration means 0.01 Lambda accuracy without the need for any calibration. Easy install; Spartan 3 v2 is made durable and water-resistant to be installed in the engine bay, most installations require only 5 wires. 14Point7 stands behind this product with a warranty that is twice as long as any competing product, 2 years Spartan 3 Features: 10ms Response Time 1x High Performance Programmable Analog Output, default is 0-5v 10-20 AFR Linear Output 1x Standard Performance Programmable Analog Output, default is Sensor Heater Status. User changeable to Simulated Narrowband Output Compatible with Bosch LSU 4.9, Bosch LSU ADV, and clone LSU 4.9 sensors. The LSU ADV sensor provides a 20x resolution increase over the LSU 4.9. Lambda range of 0.6[Lambda] to 3.4[Lambda], equivalent to 8.82[AFR] to 50[AFR] for gasoline %O2 range of 0%O2 to 21%O2 Lean Burn mode for lean burn applications CAN Bus support for the following ECUs and systems: Megasquirt 3, Adaptronic, Link, Haltech, HP Tuners, YourDyno, and MaxxECU. More supported devices coming soon via firmware update CAN Bus output of Lambda or %O2 Smart Heatup; RPM Triggered Heating of the oxygen sensor for MS3 ECU over CAN Smart Heatup; Temperature Triggered Heating, Spartan 3 will wait for the Oxygen sensor to be heated to 350C by engine exhaust gas before heating up the sensor Output Sequencer provides a dual-level precision voltage signal to the high performance analog Output. This allows you to easily check that the AFR/Lambda seen by any device connected to the analog Output is accurate, and if not, to generate a 2 point calibration to achieve perfect accuracy. MegaSquirt users, check out how to use the Output Sequencer for maximum AFR accuracy here Does not require Free Air Calibration Compatible with Torque OBD for Android to display AFR Onboard FTDI based serial-USB converter ARM Cortex M4 0.1% tolerance components for all components that affect accuracy Separate LSU Heater ground and Electronics ground for improved noise performance and accuracy 2-year warranty 60-day money-back guarantee Note: Lambda sensor carries a 3-month warranty Additional Features and Specifications: 8 ft cable length Operating Temperature: -40[C] to +105[C] Water, dust, and dirt resistant Pricing: Spartan 3 without LSU @ $139 USD Spartan 3 with LSU 4.9 @ $191.50 USD Spartan 3 with LSU ADV @ 239 USD If Spartan 3 is ordered with a sensor, Spartan 3 will ship configured for that sensor. If Spartan 3 is purchased without a sensor then Spartan 3 will ship configured for the LSU 4.9, the user can change the sensor settings using a serial terminal. You can also request LSU 4.9 and LSU ADV configuration at the time of ordering using the order notes Testimonials Software and Documentation Spartan 3 User Manual Package Contents Spartan 3 v2 USB Converter 1x Waterproof fuse holder 2x 5 Amp fuse (replacement included) Spartan 3/Lite Compatible Products: Solid AFR Gauge Premium Oxygen Sensor Bung Standard Oxygen Sensor Bung Bosch LSU ADV Bosch LSU 4.9
View product
→
